CSDM for Nuke map only...map cfg?
-
- New to forums
- Posts: 6
- https://www.youtube.com/channel/UC40BgXanDqOYoVCYFDSTfHA
- Joined: Thu Jun 15, 2006 12:07 pm
- Location: Philly
CSDM for Nuke map only...map cfg?
I'm hoping this is something simple that someone can help me with...
I would like to run csdm 1.7 on ONLY ONE MAP in my rotation (de_nuke).
Is that possible...if so can can someone share the map cfg?
From my reading, after installing csdm I think I need to:
1) create a cfg just for de_nuke that would invoke csdm
2)add the command "mapchangecfgfile server.cfg" to my server.cfg that will restore the default (non-csdm) setting when the map changes
Really appreciate any help on this.
I would like to run csdm 1.7 on ONLY ONE MAP in my rotation (de_nuke).
Is that possible...if so can can someone share the map cfg?
From my reading, after installing csdm I think I need to:
1) create a cfg just for de_nuke that would invoke csdm
2)add the command "mapchangecfgfile server.cfg" to my server.cfg that will restore the default (non-csdm) setting when the map changes
Really appreciate any help on this.
Just create a de_nuke.cfg in notepad with:
Then place the de_nuke.cfg into addons/amxmodx/configs/maps/ (yes, you may have to make the maps directory in FTP)
In your server.cfg, put:
Code: Select all
csdm_enable
In your server.cfg, put:
Code: Select all
csdm_disable
-Nick
Everthing works great!
For anyone else interested here are the nitty-gritty details:
1) Download CSDM here: http://www.tcwonline.org/~dvander/csdm/ ... e=download
Based on postings by others, I went with version 1.7
2) Extract the CSDM file and do the following to install it for a "selective map" config:
a. Copy csdm_mod.amx to your addons\amxmodx\plugins\ folder
b. Add "csdm_mod.amxx" (without quotes) to addons\amxmodx\plugins.ini
c. CSDM requires the Fun module and the Engine module:
Open "addons\amxmodx\modules.ini" and remove the semi-colon (";") from the lines for the Engine module and Fun module
d. Copy the folder "csdm" to your addons\amxmodx folder. It contains the predefined entity and spawn lists. RANDOM SPAWNING WILL NOT WORK OTHERWISE!
e. Make a map config for the map(s) on which you want csdm to run. For example for de_nuke, place the following command in a file saved as de_nuke.cfg:
csdm_active 1 //(this command is for csdm 1.7, for 2.0 and above use "csdm_enable")
f. Place the cfg file from step e in:
addons/amxmodx/configs/maps/ (you will have to create the maps directory in FTP if it doesn't already exist)
g. Add the following two commands to your exisiting server.cfg:
mapchangecfgfile server.cfg
csdm_active 0 //(this command is for csdm 1.7, for 2.0 and above use "csdm_disable")
For anyone else interested here are the nitty-gritty details:
1) Download CSDM here: http://www.tcwonline.org/~dvander/csdm/ ... e=download
Based on postings by others, I went with version 1.7
2) Extract the CSDM file and do the following to install it for a "selective map" config:
a. Copy csdm_mod.amx to your addons\amxmodx\plugins\ folder
b. Add "csdm_mod.amxx" (without quotes) to addons\amxmodx\plugins.ini
c. CSDM requires the Fun module and the Engine module:
Open "addons\amxmodx\modules.ini" and remove the semi-colon (";") from the lines for the Engine module and Fun module
d. Copy the folder "csdm" to your addons\amxmodx folder. It contains the predefined entity and spawn lists. RANDOM SPAWNING WILL NOT WORK OTHERWISE!
e. Make a map config for the map(s) on which you want csdm to run. For example for de_nuke, place the following command in a file saved as de_nuke.cfg:
csdm_active 1 //(this command is for csdm 1.7, for 2.0 and above use "csdm_enable")
f. Place the cfg file from step e in:
addons/amxmodx/configs/maps/ (you will have to create the maps directory in FTP if it doesn't already exist)
g. Add the following two commands to your exisiting server.cfg:
mapchangecfgfile server.cfg
csdm_active 0 //(this command is for csdm 1.7, for 2.0 and above use "csdm_disable")
Thanks for the tip Nick. I will indeed give it a try.
What are your thoughts on 2.0? I googled up some relatively recent feedback from other server admins that complained of bugginess with it and that the solution was to revert to 1.7. So that is why I opted to start with 1.7.
However, I recognize that "feedback" like that is skewed to only represent those with problems and may not be indicative of most users.
If I should be on 2.0 now, I'll switch....or would you suggest just wait for 2.10?
What are your thoughts on 2.0? I googled up some relatively recent feedback from other server admins that complained of bugginess with it and that the solution was to revert to 1.7. So that is why I opted to start with 1.7.
However, I recognize that "feedback" like that is skewed to only represent those with problems and may not be indicative of most users.
If I should be on 2.0 now, I'll switch....or would you suggest just wait for 2.10?
Nick:
HELP!
I spoke to soon. My random respawns aren't working.
Everything else works fine:
csdm starts when de_nuke is loaded (and stops when I change map). The weapon buy menus work fine. Spawn protection is working. The only prob is that both sides spawn at default points.
I followed the directions per installation documentation (that I cut 'n pasted above).
Can you give this a look-see and offer any suggestions?
HELP!
I spoke to soon. My random respawns aren't working.
Everything else works fine:
csdm starts when de_nuke is loaded (and stops when I change map). The weapon buy menus work fine. Spawn protection is working. The only prob is that both sides spawn at default points.
I followed the directions per installation documentation (that I cut 'n pasted above).
Can you give this a look-see and offer any suggestions?
Nick:
Thanks..got it fixed. Indeed, I missed a couple things in the install.
Here are the correct revised steps for anyone else in the future (please delete my post above as the steps are incorrect).
1) Download CSDM here: http://www.tcwonline.org/~dvander/csdm/ ... e=download
Based on postings by others, I went with version 1.7
2) Extract the CSDM file and do the following to install it for a "selective map" config:
a. Copy csdm_mod.amx to your addons\amxmodx\plugins\ folder
b. Add "csdm_mod.amxx" (without quotes) to addons\amxmodx\plugins.ini
c. CSDM requires the Fun module and the Engine module:
Open "addons\amxmodx\modules.ini" and remove the semi-colon (";") from the lines for the Engine module and Fun module
d. Copy the folder "csdm" to your addons\amxmodx folder. It contains the predefined entity and spawn lists. RANDOM SPAWNING WILL NOT WORK OTHERWISE!
e. Make a map config for the map(s) on which you want csdm to run. For example for de_nuke, place the following command in a file saved as de_nuke.cfg:
csdm_enable 1
f. Place the cfg file from step e in:
addons/amxmodx/configs/maps/ (you will have to create the maps directory in FTP if it doesn't already exist)
g. Add the following two commands to your exisiting server.cfg:
mapchangecfgfile server.cfg
csdm_enable 0
h. Add the following cvars to your amxx.cfg (this list is for optimal "normal setup" from the csdm 1.7 documentation):
csdm_active 1
csdm_freeze_time 4.0
csdm_add_items 0
csdm_random_spawns 1
csdm_kill_all 0
csdm_drop_packs 0
csdm_drop_weapons 1
csdm_delete_time 20.0
csdm_allow_clguns 0
csdm_auto_drop 1
csdm_auto_equip 1
csdm_auto_gren 1
csdm_spawn_spam 1
csdm_enable_amenu 0
csdm_enable_gmenu 0
Abudoggie
Thanks..got it fixed. Indeed, I missed a couple things in the install.
Here are the correct revised steps for anyone else in the future (please delete my post above as the steps are incorrect).
1) Download CSDM here: http://www.tcwonline.org/~dvander/csdm/ ... e=download
Based on postings by others, I went with version 1.7
2) Extract the CSDM file and do the following to install it for a "selective map" config:
a. Copy csdm_mod.amx to your addons\amxmodx\plugins\ folder
b. Add "csdm_mod.amxx" (without quotes) to addons\amxmodx\plugins.ini
c. CSDM requires the Fun module and the Engine module:
Open "addons\amxmodx\modules.ini" and remove the semi-colon (";") from the lines for the Engine module and Fun module
d. Copy the folder "csdm" to your addons\amxmodx folder. It contains the predefined entity and spawn lists. RANDOM SPAWNING WILL NOT WORK OTHERWISE!
e. Make a map config for the map(s) on which you want csdm to run. For example for de_nuke, place the following command in a file saved as de_nuke.cfg:
csdm_enable 1
f. Place the cfg file from step e in:
addons/amxmodx/configs/maps/ (you will have to create the maps directory in FTP if it doesn't already exist)
g. Add the following two commands to your exisiting server.cfg:
mapchangecfgfile server.cfg
csdm_enable 0
h. Add the following cvars to your amxx.cfg (this list is for optimal "normal setup" from the csdm 1.7 documentation):
csdm_active 1
csdm_freeze_time 4.0
csdm_add_items 0
csdm_random_spawns 1
csdm_kill_all 0
csdm_drop_packs 0
csdm_drop_weapons 1
csdm_delete_time 20.0
csdm_allow_clguns 0
csdm_auto_drop 1
csdm_auto_equip 1
csdm_auto_gren 1
csdm_spawn_spam 1
csdm_enable_amenu 0
csdm_enable_gmenu 0
Abudoggie
-
- This is my homepage
- Posts: 99
- Joined: Tue Feb 22, 2005 9:54 am
- Location: Straight out of City17
- Contact: