BC2/BF3/MoH/MoHW admin daemon feedback

Use this forum if you have a relatively general question or comment about a game, Ventrilo, TeamSpeak, or Murmur/Mumble server with us. If you have a server-specific question that might not help out the community, please directly contact us through your control panel instead.
Post Reply
User avatar
Edge100x
Founder
Founder
Posts: 12218
Joined: Thu Apr 18, 2002 11:04 pm
Location: Seattle
Contact:

Re: BC2 admin daemon feedback

Post by Edge100x » Tue Oct 23, 2012 2:21 pm

There is no public documentation for Warfighter yet, and the private documentation is honestly pretty bad right now -- using what I've written in the KB and on the Easy setup page and combining it with the output from "admin.help" would be the best way to go currently.

In-game commands can't work due to the MoHW bugs, though.

User avatar
TacTicToe
This is my homepage
This is my homepage
Posts: 846
Joined: Fri Feb 18, 2011 1:08 pm
Location: USA
Contact:

Re: BC2 admin daemon feedback

Post by TacTicToe » Tue Oct 23, 2012 4:03 pm

Thank goodness. I thought I was losing my mind or something. So atm there is no good way to actually admin our servers. Gotta love EA! Dont see any third party support anytime soon. :roll:

So, banners dont work. In game scrolling messages dont work. In game admin commands dont work. No good way to advertise your server forums on the server then. A large part of the players are form the damn match making system. 8O
Image

User avatar
TimeX
Staff
Staff
Posts: 1387
Joined: Thu Jul 22, 2004 12:24 am
Location: Big Bear, CA

Re: BC2 admin daemon feedback

Post by TimeX » Tue Oct 23, 2012 4:48 pm

Be glad matchmaking isn't broken, also. :(
TimeX

User avatar
Edge100x
Founder
Founder
Posts: 12218
Joined: Thu Apr 18, 2002 11:04 pm
Location: Seattle
Contact:

Re: BC2 admin daemon feedback

Post by Edge100x » Tue Oct 23, 2012 4:53 pm

Adminning the servers is possible, but you have to alt-tab out and use a tool (like the rcon tool on our "Server control" page).

I've communicated all of the bugs I've found to DICE, as well. I expect for them to address at least some of these in the next server update (not today's/tonight's).

User avatar
Ralphort
New to forums
New to forums
Posts: 7
Joined: Thu Oct 18, 2012 10:42 am
Location: Windy City
Contact:

Re: BC2 admin daemon feedback

Post by Ralphort » Sun Oct 28, 2012 1:40 pm

Where can i get a default lists of Game Daemond commands?
Image

User avatar
Ralphort
New to forums
New to forums
Posts: 7
Joined: Thu Oct 18, 2012 10:42 am
Location: Windy City
Contact:

Re: BC2 admin daemon feedback

Post by Ralphort » Sun Oct 28, 2012 2:23 pm

It's OK, I saw the list in the control panel...
Image

User avatar
Edge100x
Founder
Founder
Posts: 12218
Joined: Thu Apr 18, 2002 11:04 pm
Location: Seattle
Contact:

Re: BC2 admin daemon feedback

Post by Edge100x » Sun Oct 28, 2012 9:50 pm

The list is also available here, if you prefer to see it here in the forum: http://www.nfoservers.com/forums/viewto ... =50&t=4510

shadow2k1
New to forums
New to forums
Posts: 4
Joined: Sun Mar 24, 2013 12:42 pm

Re: BC2/BF3/MoH/MoHW admin daemon feedback

Post by shadow2k1 » Fri Mar 29, 2013 6:36 am

the ingame admin from the control panel interferes with the insane limits and procon rules plugins

let me explain

i have proconrulz plugin running if I type in !rules
it displays the rules i have set then at the end it displays
'rules' is an invalid command

if i turn off the ingame admin via the control panel
i do not get this
it would be nice to use the ingame admin however until this is corrected i have turned this off

User avatar
Edge100x
Founder
Founder
Posts: 12218
Joined: Thu Apr 18, 2002 11:04 pm
Location: Seattle
Contact:

Re: BC2/BF3/MoH/MoHW admin daemon feedback

Post by Edge100x » Fri Mar 29, 2013 12:00 pm

This is not a bug. The admin daemon is designed to respond when an invalid command is entered.

shadow2k1
New to forums
New to forums
Posts: 4
Joined: Sun Mar 24, 2013 12:42 pm

Re: BC2/BF3/MoH/MoHW admin daemon feedback

Post by shadow2k1 » Sat Mar 30, 2013 6:43 am

the command isnt invalid,
it does work as designed but after it scrolls the rules or messages i have set up, it then returns that the command is invalid
perhaps you can look into commenting that line out of the code and not having it return that message on screen, maybe make a log of it or something

User avatar
kraze
Staff
Staff
Posts: 4357
Joined: Fri Sep 17, 2010 9:06 am
Location: California

Re: BC2/BF3/MoH/MoHW admin daemon feedback

Post by kraze » Sat Mar 30, 2013 8:45 am

Yes, but the command is invalid for the admin daemon. The admin daemon doesn't know you are running Procon with a rules plugin.
@Kraze^NFo> Juski has a very valid point
@Juski> Got my new signature, thanks!
@Kraze^NFo> Out of context!
@Juski> Doesn't matter!
@Juski> You said I had a valid point! You can't take it back now! It's out there!

User avatar
Spray
Staff
Staff
Posts: 543
Joined: Wed Dec 28, 2011 10:41 pm
Location: Oregon

Re: BC2/BF3/MoH/MoHW admin daemon feedback

Post by Spray » Tue Apr 30, 2013 7:24 pm

Shadow2k1, here is what is happening:

Both programs are listening to the rcon output of your server, looking for stats, chat, commands etc...

You type in !rules in chat.

Procon sees in RCON that a command was typed, it checks to see if that is a valid command (It is for Procon) and you get the output from the Procon rules plugin.

The NFO admin daemon also sees that same command that was typed. It checks to see if it is a valid command (it's not in this case) and responds with "Invalid Command" response.

The two programs are acting independently on your input, both as intended.

Blammo
New to forums
New to forums
Posts: 1
Joined: Tue Oct 29, 2013 10:22 am

Re: BC2/BF3/MoH/MoHW admin daemon feedback

Post by Blammo » Tue Oct 29, 2013 10:27 am

I do not see the list of commands in my Easy Setup tab in the control panel, nor do I see a way to set which commands a specific user can execute. I can activate the daemon, add users, and set up a recurring message, but no command list or admin attributes.

I think I may be blind?

This is for a BF4 server, btw.

User avatar
Vanderburg
Staff
Staff
Posts: 1133
Joined: Sat Nov 13, 2010 7:27 am
Location: Dallas, TX

Re: BC2/BF3/MoH/MoHW admin daemon feedback

Post by Vanderburg » Tue Oct 29, 2013 11:31 am

Blammo wrote:I do not see the list of commands in my Easy Setup tab in the control panel, nor do I see a way to set which commands a specific user can execute. I can activate the daemon, add users, and set up a recurring message, but no command list or admin attributes.

I think I may be blind?

This is for a BF4 server, btw.
Next to the list of admins you add in the admin daemon section, there's a little down-facing arrow that you can click on. Clicking on that shows the commands that a user would have access to.

gomer
New to forums
New to forums
Posts: 8
Joined: Mon Oct 28, 2013 11:26 am

Re: BC2/BF3/MoH/MoHW admin daemon feedback

Post by gomer » Wed Oct 30, 2013 7:54 pm

how do you shuffle teams during game on a ranked server? it gets tacked ot hell everygame

Post Reply