Rust Setup

[kraze]

I'm unsure as to why it wouldn't be working. I guess you could try doing this as your bat file instead of what I posted.

Code: Select all

START "" "path to exe"

[J-English]

doing that way opens up the command box with c:\games\rust\release>
if i add batchmode i get a pop up saying batchmode is not recognized as etc etc.

could you look at it kraze and see if you can get it going if its possible in your own time.
Ive ran out of ideas..

[kraze]

What if you add "pause" to the end of the batch file? It should allow you to see why it's not booting.

[J-English]

Ok will try that when i get home.
Just fo confirm creating a bat file would be add the code to a txt file then save as start.bat..from the drop down menu in the save box ...save it as all files.I assume this the correct way?.Just so i know the bat file is created as you would create it.

[kraze]

Correct.

[J-English]

giving up at this point. Whenever nfo decides to make rust available on managed it will be alot easier.

[kraze]

Unless we're both missing something I am unsure as to why it wouldn't be working :/ As for Rust support. We will be supporting it but as per usual we're in a holding pattern until it becomes a bit more polished.

[J-English]

The problem only starts when you +Batchmode or any other lines...at the end after running the bat file..it says utf-8 not supported.so i wonder if saving the bat file under unicode etc will work.because it gives u the options when you save it as start.bat .then from the drop down menu as ALL files..also before hitting save gives u another option Ansi,unicode,UTF etc.might try that when i get home.strange thing is i get the same issue when doing this on my test laptop.

[J-English]

Does this mean the servers running?

Im using this as my target line(shortcut)

Code: Select all

C:\rust\RustDedicated.exe +server.hostname "NFOservers.com: Stress test" +server.port 28015 +server.identity "NFOrust" +server.seed 6738 -logFile "output.txt" +server.secure +server.maxplayers "200" +server.tickrate 30

[kraze]

It appears so. Are you able to join it via the browser?

[J-English]

In my control panel iplist tab,i gather the first ip is the one im supposed to join on? With port ending 28015

[kraze]

I'd just check the adapter and see what IP is listed there. That's the IP it will use.

[J-English]

good stuff..im running around naked so it worked
To set the rcon password i guess i should make one up and set that in the target line?

[kraze]

You could do that, yes. Add +rcon.password "passwordhere" to your command line.

[J-English]

You could do that, yes. Add +rcon.password "passwordhere" to your command line.

where would my default rcon password be if i dont set rcon.password in my target line.
Do i need to add my rcon port password?.

Because opening up the dev console ingame and trying to login comes up with an invalid command.