How do I run a tracert?
Posted: Tue Oct 19, 2004 9:07 pm
- On your keyboard, press the Windows key and R at the same time (Win+R).
- Type "cmd" into the "Run" box, and hit enter.
- Type "tracert <serverip>" into the terminal window and hit enter.
- Where serverip is your server IP or DNS, such as ??.nuclearfallout.net
- This will start the trace and should look similar to this:
Code: Select all
C:\Users\John> tracert forums.nfoservers.com Tracing route to forums.nfoservers.com [192.223.25.91] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms router.lan [192.168.88.1] 2 14 ms 9 ms 9 ms 104-166-192-1.client.mchsi.com [104.166.192.1] 3 13 ms 9 ms 9 ms 172.30.4.61 4 16 ms 19 ms 19 ms 10.16.81.61 5 19 ms 19 ms 19 ms 10.16.80.23 6 28 ms 29 ms 29 ms po11.stlmo001cr1.mchsi.com [68.66.72.61] 7 32 ms 30 ms 29 ms po10.stlmo001er1.mchsi.com [68.66.73.105] 8 31 ms 29 ms 29 ms ae0-2020.cr4-stl2.ip4.gtt.net [74.199.183.102] 9 78 ms 74 ms 76 ms ae18.cr5-sea2.ip4.gtt.net [89.149.130.34] 10 69 ms 70 ms 70 ms gtt.e3.router.seattle.nfoservers.com [162.248.94.254] 11 67 ms 70 ms 70 ms forums.nfoservers.com [192.223.25.91] Trace complete. C:\Users\John> - Once the trace has completed, select the entire output with your cursor, and either right click, or press "Ctrl+C" to copy.
- Send us the results, either by email, at support@nfoservers.com or, open a support request via the "Help!" tab in your control panel. Please also include your IPv4 address, if you're not sure what that is, you can find it by going to: https://whatismyip.org/