CS 1.6 on a Linux install
Posted: Mon Dec 07, 2009 1:33 pm
Linux can be a bit more complicated to use than Windows, and generally HL1 server performance is better on Windows, so we recommend against using Linux unless you are already familiar with the OS and prefer it for other reasons than running game servers. That said, here's how to get going, from scratch, using our Gentoo Linux (+ common games installs) package.
1. Log in to your VDS through SSH. You can do this by loading up Putty, then connecting to your server using the information given on the "Server control" page in your control panel.
2. Change to the correct directory for CS 1.6.
3. Gentoo users can skip this step. On CentOS, install the "screen" utility with this command:
4. Start up your server inside a "screen" session with a command like this:
Where "screenname" is an identifier you want to use for the screen (so that you can reconnect to it later), and the "x"s represent the actual IP and maxplayers that you wish to use.
If you're running Condition Zero, just put "czero" instead of "cstrike". For DoD, use "dod".
5. Your server will now be running in the background (inside what's called a "pseudo terminal"), and will continue running, even after you close your SSH window. To view it in the foreground, type this:
Where "screenname" is the same one that you used when you started the server.
To hide the screen session again, hold down the control key and hit "a"; then, let go of both keys and hit "d". You should see the message "[detached]" and be returned to the normal command prompt.
6. To make the server start up when the machine is started, edit /etc/conf.d/local.start (Gentoo) or /etc/rc.local (CentOS) and add the same lines you used above. You can easily edit it with this command:
or:
And add the lines:
To exit out of the text editor, use "Control-X" and enter "Y" when it asks if you want to save the file.
The easiest way to run multiple servers is to copy the "hldsbase" folder to a second one:
Then, simply follow the instructions given above, adapted for the different folder and other IP address.
A few other useful "screen" commands to get you going:
Shows a list of running (and detached) screens.
Detach a screen remotely and then reattach it to your session (if you left it attached in a window on a different machine, or your SSH connection was interrupted, this can be very useful to recover it).
If you rebooted your machine and the old screen shows in "screen -ls" as "dead", you can use this to remove it from the list.
Control-a, Escape will let you cursor through the screen buffer while you are attached to a screen. Hitting Escape again will get you back out.
1. Log in to your VDS through SSH. You can do this by loading up Putty, then connecting to your server using the information given on the "Server control" page in your control panel.
2. Change to the correct directory for CS 1.6.
Code: Select all
cd /usr/steam/hldsbase
Code: Select all
yum install screen
Code: Select all
screen -AmdS screenname chrt -r 20 ./hlds_run -game cstrike +ip xxx.xxx.xxx.xxx +maxplayers xx -pingboost 2
If you're running Condition Zero, just put "czero" instead of "cstrike". For DoD, use "dod".
5. Your server will now be running in the background (inside what's called a "pseudo terminal"), and will continue running, even after you close your SSH window. To view it in the foreground, type this:
Code: Select all
screen -r screenname
To hide the screen session again, hold down the control key and hit "a"; then, let go of both keys and hit "d". You should see the message "[detached]" and be returned to the normal command prompt.
6. To make the server start up when the machine is started, edit /etc/conf.d/local.start (Gentoo) or /etc/rc.local (CentOS) and add the same lines you used above. You can easily edit it with this command:
Code: Select all
nano /etc/conf.d/local.start
Code: Select all
nano /etc/rc.local
Code: Select all
cd /usr/steam/hldsbase
screen -AmdS screenname chrt -r 20 ./hlds_run -game cstrike +ip xxx.xxx.xxx.xxx +maxplayers xx -pingboost 2
The easiest way to run multiple servers is to copy the "hldsbase" folder to a second one:
Code: Select all
cd /usr/steam
cp -rp hldsbase hldsbase2
A few other useful "screen" commands to get you going:
Code: Select all
screen -ls
Code: Select all
screen -DR screenname
Code: Select all
screen -wipe
Control-a, Escape will let you cursor through the screen buffer while you are attached to a screen. Hitting Escape again will get you back out.