How do I add an IP to my TS3 whitelist?
Posted: Tue Nov 29, 2011 4:00 pm
To add an IP to your TS3 whitelist you will need to:
1. Open your NFO control panel
2. Proceed to the "Easy Setup" tab
3. Scroll down until you see the section on "query_ip_whitelist.txt"
4. Enter the IP and select "Save new whitelist"
1. Open your NFO control panel
2. Proceed to the "Easy Setup" tab
3. Scroll down until you see the section on "query_ip_whitelist.txt"
4. Enter the IP and select "Save new whitelist"