Trying to get into my server with procon
-
0m3ga13
- New to forums
- Posts: 1
- https://www.youtube.com/channel/UC40BgXanDqOYoVCYFDSTfHA
- Joined: Thu Oct 31, 2013 9:55 am
Trying to get into my server with procon
Just started a server, new to this, have it all setup and trying to get procon to work with it, doesn't seem to work says : The requested name is valid, but no data of the requested type was found. Any help would be appreciated
-
Cyberbang3r
- This is my homepage
- Posts: 83
- Joined: Wed Oct 30, 2013 6:14 am
- Location: Connecticut
- Contact:
Re: Trying to get into my server with procon
what port are you using?
Re: Trying to get into my server with procon
I would check your port as Cyberbang3r mentioned. And are you running the RC version of ProCon 1.4.1.1?
-
.=QUACK=.Major.Pain
- This is my homepage
- Posts: 1573
- Joined: Sun Jun 26, 2011 8:03 am
Re: Trying to get into my server with procon
The username field should be blank.
Only enter your ip, port and rcon password.
Username is only required when you are using a layered Procon.
Only enter your ip, port and rcon password.
Username is only required when you are using a layered Procon.
Visit gspreviews.com And Rate & Review Your Old & Current GSP's
Find Your GSP Coupons at gspreviews.com/coupons/
Find Your GSP Coupons at gspreviews.com/coupons/