Can't connect to my TS3 Server with IP?
-
- A semi-regular
- Posts: 28
- https://www.youtube.com/channel/UC40BgXanDqOYoVCYFDSTfHA
- Joined: Thu Jul 02, 2015 2:54 pm
- Contact:
Can't connect to my TS3 Server with IP?
I recently installed a Teamspeak3 server onto my VPS but when I try and connect to it with the IP it doesn't let me connect and provides me an error that says, "Failed to connect to server". You can try it for yourself if you'd like. The IP to my teamspeak should be 162.248.95.211 as it shows;
If you know why it is doing this please share with me as it is frustrating not knowing why I can't connect to the server with the IP that it is.
If you know why it is doing this please share with me as it is frustrating not knowing why I can't connect to the server with the IP that it is.
Re: Can't connect to my TS3 Server with IP?
I know you're using Centos 7.1 (as stated in previous posts) have you tried forwarding the following ports required by TS3 via firewalld?
VoiceServer - 9987 (UDP)
ServerQuery - 10011 (TCP)
FileTransfer - 30033 (TCP)
VoiceServer - 9987 (UDP)
ServerQuery - 10011 (TCP)
FileTransfer - 30033 (TCP)
Code: Select all
# firewall-cmd --zone=public --add-forward-port=port=9987:proto=UDP:toport=9987
# firewall-cmd --zone=public --add-forward-port=port=10011:proto=TCP:toport=10011
# firewall-cmd --zone=public --add-forward-port=port=30033:proto=TCP:toport=30033
-
- A semi-regular
- Posts: 28
- Joined: Thu Jul 02, 2015 2:54 pm
- Contact:
Re: Can't connect to my TS3 Server with IP?
No I don't think I have. The tutorial I went through to install it did not state this as I could not find a tutorial for it here on NFO knowledgebase. I will try to do this now.Markie wrote:I know you're using Centos 7.1 (as stated in previous posts) have you tried forwarding the following ports required by TS3 via firewalld?
VoiceServer - 9987 (UDP)
ServerQuery - 10011 (TCP)
FileTransfer - 30033 (TCP)
Code: Select all
# firewall-cmd --zone=public --add-forward-port=port=9987:proto=UDP:toport=9987 # firewall-cmd --zone=public --add-forward-port=port=10011:proto=TCP:toport=10011 # firewall-cmd --zone=public --add-forward-port=port=30033:proto=TCP:toport=30033
-
- A semi-regular
- Posts: 28
- Joined: Thu Jul 02, 2015 2:54 pm
- Contact:
Re: Can't connect to my TS3 Server with IP?
I added those firewall cmds but still cannot connect to the server. Perhaps you would like to see the tutorial that I used in order to install it? http://forum.teamspeak.com/showthread.p ... ver-CentOSlowheartrate wrote:No I don't think I have. The tutorial I went through to install it did not state this as I could not find a tutorial for it here on NFO knowledgebase. I will try to do this now.Markie wrote:I know you're using Centos 7.1 (as stated in previous posts) have you tried forwarding the following ports required by TS3 via firewalld?
VoiceServer - 9987 (UDP)
ServerQuery - 10011 (TCP)
FileTransfer - 30033 (TCP)
Code: Select all
# firewall-cmd --zone=public --add-forward-port=port=9987:proto=UDP:toport=9987 # firewall-cmd --zone=public --add-forward-port=port=10011:proto=TCP:toport=10011 # firewall-cmd --zone=public --add-forward-port=port=30033:proto=TCP:toport=30033
Re: Can't connect to my TS3 Server with IP?
Apologies, did you also try restarting the firewalld service?
Code: Select all
# firewall-cmd --reload
Re: Can't connect to my TS3 Server with IP?
Also, I'm not receiving a response via telnet connection towards the IP/port, can you confirm that the TS3 process is currently running? You can check by running the following command;
Code: Select all
# ps -aux
-
- A semi-regular
- Posts: 28
- Joined: Thu Jul 02, 2015 2:54 pm
- Contact:
Re: Can't connect to my TS3 Server with IP?
I reloading the firewall and here is a pastebin of what was echo'd when I used that cmd: http://pastebin.com/vipJvGgkMarkie wrote:Also, I'm not receiving a response via telnet connection towards the IP/port, can you confirm that the TS3 process is currently running? You can check by running the following command;
Code: Select all
# ps -aux
Re: Can't connect to my TS3 Server with IP?
I'm seeing that your TS3 server is running on root? The guide uses user "ts3srv", did you intend for it to run on root?
Code: Select all
root 12641 1.1 1.8 704320 18304 pts/1 Sl 21:13 0:18 ./ts3server_linux_amd64
Last edited by Markie on Fri Aug 07, 2015 5:53 pm, edited 1 time in total.
-
- A semi-regular
- Posts: 28
- Joined: Thu Jul 02, 2015 2:54 pm
- Contact:
Re: Can't connect to my TS3 Server with IP?
No I did not Do you know how to fix this so I run it on the ts3srv user?Markie wrote:I'm seeing that your TS3 server is running on root? The guide uses user "ts3srv", did you intend for it to run on root?
Re: Can't connect to my TS3 Server with IP?
First you're going to want to kill the TS3 service;
When you're starting up the server, you want to switch to the correct account beforehand;
Then go ahead and run the TS3 server;
Code: Select all
# kill 12641
Code: Select all
# su ts3srv
Code: Select all
# /home/ts3srv/teamspeak3-server_linux-amd64/ts3server_startscript.sh start
-
- A semi-regular
- Posts: 28
- Joined: Thu Jul 02, 2015 2:54 pm
- Contact:
Re: Can't connect to my TS3 Server with IP?
I did the following instructions you gave me but am receiving an error trying to start it.Markie wrote:First you're going to want to kill the TS3 service;
When you're starting up the server, you want to switch to the correct account beforehand;Code: Select all
# kill 12641
Then go ahead and run the TS3 server;Code: Select all
# su ts3srv
Code: Select all
# /home/ts3srv/teamspeak3-server_linux-amd64/ts3server_startscript.sh start
Code: Select all
[root@heartfx teamspeak3-server_linux-amd64]# kill 12641
[root@heartfx teamspeak3-server_linux-amd64]# su - ts3srv
Last login: Fri Aug 7 21:10:12 EDT 2015 on pts/1
-bash-4.2$ /home/ts3srv/teamspeak3-server_linux-amd64/ts3server_startscript.sh start
ts3server.pid found, but no server running. Possibly your previously started server crashed
Please view the logfile for details.
rm: remove write-protected regular file ‘ts3server.pid’?
Code: Select all
2015-08-08 01:07:29.905773|INFO |ServerLibPriv | | TeamSpeak 3 Server 3.0.11.3 (2015-04-13 13:26:31)
2015-08-08 01:07:29.905881|INFO |ServerLibPriv | | SystemInformation: Linux 3.10.0-229.11.1.el7.x86_64 #1 SMP Thu Aug 6 01:06:18 UTC 2015 x86_64 Binary: 64bit
2015-08-08 01:07:29.905918|INFO |ServerLibPriv | | Using hardware aes
2015-08-08 01:07:29.906581|INFO |DatabaseQuery | | dbPlugin name: SQLite3 plugin, Version 2, (c)TeamSpeak Systems GmbH
2015-08-08 01:07:29.906621|INFO |DatabaseQuery | | dbPlugin version: 3.6.21
2015-08-08 01:07:29.912018|INFO |DatabaseQuery | | checking database integrity (may take a while)
2015-08-08 01:07:29.925882|INFO |SQL | | db_CreateTables() tables created
2015-08-08 01:07:30.086895|WARNING |Accounting | | Unable to find valid license key, falling back to limited functionality
2015-08-08 01:07:32.171253|INFO | | | Puzzle precompute time: 1572
2015-08-08 01:07:32.171861|INFO |FileManager | | listening on 0.0.0.0:30033
2015-08-08 01:07:32.175424|INFO |VirtualSvrMgr | | executing monthly interval
2015-08-08 01:07:32.175544|INFO |VirtualSvrMgr | | reset virtualserver traffic statistics
2015-08-08 01:07:32.337641|INFO |CIDRManager | | updated query_ip_whitelist ips: 127.0.0.1,
2015-08-08 01:07:32.337970|INFO |Query | | listening on 0.0.0.0:10011
2015-08-08 01:08:59.274792|INFO |ServerMain | | Received signal SIGTERM, shutting down.
Re: Can't connect to my TS3 Server with IP?
Delete the .pid file from your /home/ts3srv/teamspeak3-server_linux-amd64/ directory and try starting the server again.
Additionally, I'd recommend creating an auto startup script;
Lets not forget to give it the correct permissions;
Afterwards don't forget to run the following commands;
Additionally, I'd recommend creating an auto startup script;
Code: Select all
# vi /etc/rc.d/init.d/teamspeak
Code: Select all
#!/bin/sh
# chkconfig: 2345 99 10
USER="ts3srv"
TS3='/home/ts3srv/teamspeak3-server_linux-amd64'
STARTSCRIPT="$TS3/ts3server_startscript.sh"
cd $TS3
case "$1" in
'start')
su $USER -c "$STARTSCRIPT start"
;;
'stop')
su $USER -c "$STARTSCRIPT stop"
;;
'restart')
su $USER -c "$STARTSCRIPT restart"
;;
'status')
su $USER -c "$STARTSCRIPT status"
;;
*)
echo "Usage $0 start|stop|restart|status"
esac
Code: Select all
# chmod 0755 /etc/rc.d/init.d/teamspeak
Code: Select all
# chkconfig --add teamspeak
Code: Select all
# chkconfig --level 2345 teamspeak on
Code: Select all
# service teamspeak start
-
- A semi-regular
- Posts: 28
- Joined: Thu Jul 02, 2015 2:54 pm
- Contact:
Re: Can't connect to my TS3 Server with IP?
Hmm now I am in the /etc/rc.d/init.d/ directory and do not see anything regarding Teamspeak3. Seeming this is taking me forever to accomplish myself would you offer to do it for me for a small payment via PayPal? I am not sure I understand this fully as you do. If you are willing to help me out feel free to add me on Skype or connect to my other teamspeak to talk to me. My Skype name is lowheartrate and my current teamspeak server address is 104.243.24.204Markie wrote:Delete the .pid file from your /home/ts3srv/teamspeak3-server_linux-amd64/ directory and try starting the server again.
Additionally, I'd recommend creating an auto startup script;
Code: Select all
# vi /etc/rc.d/init.d/teamspeak
Lets not forget to give it the correct permissions;Code: Select all
#!/bin/sh # chkconfig: 2345 99 10 USER="ts3srv" TS3='/home/ts3srv/teamspeak3-server_linux-amd64' STARTSCRIPT="$TS3/ts3server_startscript.sh" cd $TS3 case "$1" in 'start') su $USER -c "$STARTSCRIPT start" ;; 'stop') su $USER -c "$STARTSCRIPT stop" ;; 'restart') su $USER -c "$STARTSCRIPT restart" ;; 'status') su $USER -c "$STARTSCRIPT status" ;; *) echo "Usage $0 start|stop|restart|status" esac
Afterwards don't forget to run the following commands;Code: Select all
# chmod 0755 /etc/rc.d/init.d/teamspeak
Code: Select all
# chkconfig --add teamspeak
Code: Select all
# chkconfig --level 2345 teamspeak on
Code: Select all
# service teamspeak start
Re: Can't connect to my TS3 Server with IP?
I would be more then happy to do this for you, but I won't take your money =p.. I will be contacting you shortly.
Re: Can't connect to my TS3 Server with IP?
Could you also help me out? i'm having a issue alike to his.
I would really appreciate that, i'm no linux genius and i've been struggling with it for the past 2 days now, the Server was running all good and well and then shit hit the wall when i turned it off and moved it into the livingroom, ever since then i can't connect... the server says it's running, but i (and noone else) can join it.
This is all i have, if you could help me in any way, i would really appreciate that.
I would really appreciate that, i'm no linux genius and i've been struggling with it for the past 2 days now, the Server was running all good and well and then shit hit the wall when i turned it off and moved it into the livingroom, ever since then i can't connect... the server says it's running, but i (and noone else) can join it.
Code: Select all
drwx------ 3 esel esel 4096 Mai 21 20:11 internal
drwx------ 4 esel root 4096 Mai 20 23:27 virtualserver_1
drwx------ 4 esel root 4096 Mai 21 19:42 virtualserver_3
Code: Select all
-rw-rw-r-- 1 esel esel 47909 Apr 25 17:19 CHANGELOG
drwxrwxr-x 3 esel esel 4096 Apr 22 14:31 doc
drwx------ 5 esel root 4096 Mai 21 20:11 files
-rwxrwxr-x 1 esel esel 988528 Apr 25 17:19 libts3db_mariadb.so
-rwxrwxr-x 1 esel esel 2019584 Apr 25 17:19 libts3db_sqlite3.so
-rw-rw-r-- 1 esel esel 36710 Apr 25 17:19 LICENSE
drwxrwxrwx 2 esel root 4096 Mai 21 20:16 logs
-rw-r--r-- 1 esel root 1 Mai 20 23:27 query_ip_blacklist.txt
-rw-r--r-- 1 esel root 10 Mai 20 23:27 query_ip_whitelist.txt
drwxrwxr-x 2 esel esel 4096 Apr 25 17:19 redist
drwxrwxr-x 2 esel esel 4096 Apr 22 14:31 serverquerydocs
drwxrwxr-x 5 esel esel 4096 Apr 22 14:31 sql
-rwxrwxr-x 1 esel esel 8212624 Apr 25 17:19 ts3server
-rwxrwxr-x 1 esel esel 129 Apr 25 17:19 ts3server_minimal_runscript.sh
-rw-r--r-- 1 esel esel 5 Mai 21 20:16 ts3server.pid
-rw-r--r-- 1 esel esel 190464 Mai 21 19:42 ts3server.sqlitedb
-rwxrwxr-x 1 esel esel 2661 Apr 25 17:19 ts3server_startscript.sh
drwxrwxr-x 2 esel esel 4096 Apr 25 17:19 tsdns
Code: Select all
2016-05-21 19:57:23.102951|INFO |ServerLibPriv | |TeamSpeak 3 Server 3.0.12.4 (2016-04-25 15:16:45)
2016-05-21 19:57:23.103242|INFO |ServerLibPriv | |SystemInformation: Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64 Binary: 64bit
2016-05-21 19:57:23.104937|INFO |DatabaseQuery | |dbPlugin name: SQLite3 plugin, Version 2, (c)TeamSpeak Systems GmbH
2016-05-21 19:57:23.105060|INFO |DatabaseQuery | |dbPlugin version: 3.8.6
2016-05-21 19:57:23.105508|INFO |DatabaseQuery | |checking database integrity (may take a while)
2016-05-21 19:57:23.142255|WARNING |Accounting | |Unable to find valid license key, falling back to limited functionality
2016-05-21 19:57:25.089595|INFO | | |Puzzle precompute time: 1784
2016-05-21 19:57:25.090274|INFO |FileManager | |listening on 0.0.0.0:30033
2016-05-21 19:57:25.138256|ERROR |FileHelp | |CustomFileHelpers::createDirectory _wmkdir files/virtualserver_3/internal/icons -1 13
2016-05-21 19:57:25.138605|ERROR |VirtualSvrMgr | |loading VirtualServer(3) failed to start, error: invalid file path
2016-05-21 19:57:25.139129|INFO |CIDRManager | |updated query_ip_whitelist ips: 127.0.0.1,
2016-05-21 19:57:25.140139|INFO |Query | |listening on 0.0.0.0:10011
Code: Select all
2016-05-21 19:57:25.138380|ERROR |VirtualServer |3 |Unable to create virtualserver filetransfer internal/icons directory. Error: 2052 dir: files/virtualserver_3
2016-05-21 19:57:25.138864|INFO |VirtualServerBase|3 |stopped