TADST for Arma 3

Ask questions about dedicated servers here and we and other users will do our best to answer them. Please also refer to the self-help section for tutorials and answers to the most commonly asked questions.
Post Reply
Sitrepo
New to forums
New to forums
Posts: 3
https://www.youtube.com/channel/UC40BgXanDqOYoVCYFDSTfHA
Joined: Sun Mar 15, 2015 10:55 am

TADST for Arma 3

Post by Sitrepo »

We started using TADST for Arma 3 on a virtual server. Before that we had an unmanaged server from which i saved the basic.cfg. In TADST you can set the bandwidth, but what was in the .cfg, I cannot set that, it comes up with different numbers after I save it. Any suggestions? Maybe I should use another way to start servers?
Top
Caliban55
This is my homepage
This is my homepage
Posts: 439
Joined: Sat Sep 04, 2010 10:20 am
Location: Cologne, Gemany
Contact:
Contact Caliban55

Re: TADST for Arma 3

Post by Caliban55 »

I would recommend to start an Arma server with the associated arma3server.exe or the arma3launcher.exe, if you want a GUI (all available through a standard Arma 3 installation). Using a 3rd party program can result in additional work, if it comes to troubleshoot server problems/configuration fine tuning. Plus, they are not needed.
Top
Post Reply

Return to “Dedicated servers and Virtual Dedicated Servers”